HD Hyundai DM01
Intermittent rating kW(PS) / rpm | Max. torque N.m(kg.m) / rpm |
---|---|
24.6(33) / 2400 | 108(11.0) / 1800 |
36.6(49) / 2600 | 165(16.8) / 1800 |
Engine Model | D18 |
Engine Type | In-line 3 cycle Diesel, water cooled, Turbo-intercooler |
Combustion type | Direct injection |
Cylinder Type | Linerless |
Number of cylinders | 3 |
Bore x stroke | 90 x 94 mm |
Displacement | 1.794 lit. |
Compression ratio | 17.0 : 1 |
Firing order | 1-2-3 |
Dry weight | 198 kg (w/o starter, alternator, aftertreatment) |
Dimension (LxWxH) | 573.5 x 556 x 673 mm |
Rotation | Counter clockwise viewed from Flywheel |
Fly wheel housing | SAE NO.4M |
Fly wheel | Clutch 10" |
Injection pump | DELPHI DFP 4.4 |
Governor | Controlled by ECU |
Feed pump | N/A |
Injection nozzle | Multi hole type |
Fuel filter | Full flow, cartridge type |
Used fuel | EN590 |
Lub. Method | Fully forced pressure feed type |
Oil pump | Gear type driven by crankshaft |
Oil filter | Full flow, cartridge type |
Oil pan capacity | High level 6.31iters; Low level 2.8 liters |
Angularity limit | 35 deg all around |
Lub. Oil | 10W30 CJ-4 (Refer to Operation Manual) |
Cooling method | Fresh water forced circulation |
Water capacity (engine only) | Approx. 3.3 lit |
Water pump | Centrifugal type driven by belt |
Thermostat | Wax – pellet type; Opening temp. 82°C; Full open temp. 97°C |
Cooling fan | Not Available |
Charging generator | 12V x 90A alternator |
Voltage regulator | Built-in type IC regulator |
Starting motor | 12V x 2.7kW |
Battery Voltage | 12V |
Water flow | 120 liters/min @2,600 rpm |
Heat rejection to coolant | 7.8 kcal/sec @2,600 rpm |
Heat rejection to CAC | 1.3 kcal/sec @2,600 rpm |
Air flow | 3,426 liter/min @2,600 rpm |
Exhaust gas temp. | 750 °C @2,600 rpm |
Max. permissible restrictions Intake system | 220 mmH2O initial; 635 mmH2O final |
Max. permissible restrictions Exhaust system | 1,500 mmH2O max. |
Type | Over head valve |
Number of valve | Intake 2, exhaust 2 per cylinder |
Valve lashes at cold | Intake 0.4mm; Exhaust 0.4mm |